HYPUMP70

Bristan Hydropower Duraspeed Shower Booster Pump 70

• Suitable for gravity systems only
• Variable speed twin impeller pump driving both hot and cold supplies to boost shower power up to 20 times
• Pump rated at 2.0 bar pressure equivalent to 20 metres (70’ head)
• Vibration free and gives noise reduction of up to 30% over similar pumps
• Pump supplied with 15mm push fit inlet and outlet connections
• Inlet connection washers with integral filters
• Minimum 115 litres (25 gallon) cold water tank capacity recommended
• Pump requires 230 Volt AC supply fused at 3 amps via a double pole isolator with contact gap of at least 3mm
• Pump fitted with mains supply cable
• Power consumption – 280 W (fuse rating – 3 A)
• Pump must be protected by a 30ma RCD (Residual Current Device)
• For optimum performance pump should have dedicated hot and cold water supplies direct from cold water tank and hot water cylinder (preferably using an Essex flange on hot cylinder)
• Under no circumstances should the pump be connected to mains water supply
• Two year manufacturer guarantee