ST46387

Stuart Turner Monsoon Extra Positive Single System Booster P

Positive pumps are suitable for installation into an open vented hot and cold system
They require a gravity flow of 1.0 l/min to operate.
 
A positive single pump can be used to:
 
Boost the water pressure in either the hot or cold water supply pipe.
Boost the blended water outlet between the shower valve and the shower rose.

Note: These pumps should not be used for:
 
Supply of hot and cold water services to a common mixer.
Supply of pumped hot water service to a common mixer where the cold supply is mains fed.

Stuart Turner Monsoon Extra Pos 1.4 bar Single System Booster Pump

Stuart Turner Monsoon Extra Positive 1.4 bar Single System Booster Pump

The Pump

• Inlet strainer 
• Stuart hard face mechanical seal 
• Flow switch sensitivity approx. 1.0 l/min
• Max. inlet head 10 metres
• Plumbing connection 22 mm push-in
• Flexible hose 2 off 22 mm push-in x 300 mm long
• Anti vibration feet  
     
• WRAS no. 0304065
     
  The Motor  
• Power supply 230/1/50
• Enclosure rating IPX4
• Motor Induction type permanent capacitor thermally protected
• Power consumption 445 Watts
• Full load 2.0 Amps
• Fuse rating 5 Amps
• Pre wired 
• Rating Continuous (S1) 
     
• Gross weight (packed) 6.9 Kg
• 2 Year Guarantee United Kingdom only
   

bar
Positive 1.4 bar Single
Positive 3.0 bar Single
Positive 3.5 bar Single
Positive 4.5 bar Single